English русский
Furkan Engineering had been running for the world's security since 1992
 
About Us | Career | +90 212 483 17 83 | Contact  

 
Main Page > Fire Alarm Systems > Seismic Sensors > LED Display Seismic Sensor

 


PR-EQ Deprem Sensörü
ELECTROMECHANICHAL SEISMIC SENSORS

 

  1. - Power / Fault / EARTQUAKE (ALARM) / Battery State LED Indicators
  2. - ALARM / TEST Buttons
  3. - Battery powered. (12V 1,3Ah battery included with system). Standby time of the seismic sensor after the mains has failed is about 36hours
  4. - The Seismic Sensor also includes also 4X relay alarm output to be used for remote signals and to stop the power supplies, avoiding, in this case possible fire and explosions sources , or to connect to fire alarm systems , AVAC systems , elevators
  5. - Seismic sensor is equipped with a multipurpose input. This input use with gas leakage detector , smoke detector or any other control device. When this input is triggered by a gas detector , smoke detector , seismic sensor will be automatically switches to alarm states and activate all outputs.
  6. - Meet or Exceeds TS EN 12884 - AMSI/ASCE/25-06 standards
  7. - The Seismic Sensor can be work with elevators. When a primary and/or secondary wave seismic sensor is activated, all elevators will be stopped at the nearest floor and park there with the doors open to facilitate the safe evacuation of passengers.

Price : On Request - In Stock.
 

Able to detect earthquake acceleration and send a pulse to safety system to shut valve down to prevent fire after earthquake. This stand alone battery powered Gas Shut-Off system automatically activates the electronic shutoff valve when the sensor detects serious ground movement, thus minimizing possible further damage from gas explosion.


 
ELECTROMECHANICAL SEISMIC SENSOR
  • Stand alone battery powered Seismic Sensor Gas Shut-Off system automatically activates the electronic shutoff valve when the sensor detects serious ground movement, thus minimizing possible further damage from gas explosion.
    This device has 4 NO/NC dry contact which activate in case an eartquake. This multipurpose outputs use for cut-off power systems such as generators , UPS , mains supply
 
Seismic Sensors Use of Areas

Seismic Sensor , Earthquake gas shut-off systems
Technical Specification

Working Temperature: 100-260V AC , 50Hz/60Hz
Quiscent Current : 36mA
Relay Output Rate: 16A / 250V AC
Selenoid Valve Output: 2,5A - 12V DC
Gas Detector Input : VAR
Battery : 1,3Ah 12V
Battery Working Duration : 36 Saat
Sensing Plane : Horizontal Plane X-Y
Duyarlı En Geniş İvme Aralığı : 0+ 1g / -1g
Frequence Sensitivity Range : Ts12884
Minimum Accelaration Threshold : 0 +/- 40mg
Analogue Output Sensitivity : 500mV/g
Digital Output Resolution : 40mg
Max. Impact Accelaration Strengt : 50.000g
Working Temperature : 0 +51,5 0C
Humidity : % 0-90
Internal Sounder : Piezoelektrik Buzzer
Alarm Sounder : 85dB / 1 mt
LED Display: Mains / Fault / Battery State / Alarm
Buttons :
TEST - RESET
Weight : 4,7Kg.
Dimensions : 240mm X 220mm X 80mm
 
Other Products We Recommend

CP-550DB-Alarm Sounder
Price:On-Request
CP-750CDB-Sounder Beacon
Price:On-Request
Solo C3 -CO Aerosol
Price:On-Request
   
Back To Top

  • Design and specifications are subject to change without prior notice.
Where to buy
 
Bookmark and Share
FURKAN ENGINEERING 2020
www.furkanmuhendislik.com.tr | info@furkanmuhendislik.com.tr